Electrical Safety - Webb WEER33 Operator's Manual & Parts List

INSTRUCTION MANUAL
PREPARATION
§ Always wear appropriate footwear, such as work boots, and trousers when operating the mower.
Do not operate the equipment when barefoot or wearing open sandals. Always wear safety
goggles or safety glasses with side shields when operating the mower.
§ Thoroughly inspect the area where the equipment is to be used and remove all objects which can
be thrown by the machine.
§ Before using, always visually inspect to see that the blades, blade bolts and cutter assembly are
not worn or damaged. Replace worn or damaged blades and bolts in sets to preserve balance.
§ Only use accessories approved by the manufacturer.
§ Do not operate the machine while under the influence of alcohol or drugs.
§ Never operate the machine in wet grass. This could cause you to slip while mowing.

ELECTRICAL SAFETY

§ Power plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk
of electric shock.
§ Avoid unintentional starting. Always check that the switch is in Off position before plugging in the
product to the power supply. Do not carry a plugged in product with your finger on the switch.
§ Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
§ Do not expose the product to rain or wet conditions.
§ Water entering an appliance will increase the risk of electric shock.
§ Electrical power should be supplied via a residual current device (RCD) with a tripping current of
not more than 30 mA.
§ Before use, check the supply and extension cord for signs of damage or aging. If the cord
becomes damaged during use, disconnect the cord from the supply immediately. Do not touch
the cord before disconnecting the supply. Do not use the product if the cord is damaged or worn.
§ If you need to use an extension cable, ensure it is suitable for outdoor use and has a current
capacity rating, sufficient to supply your product. Check it before every use for damage, always
uncoil it completely, during use because coiled cables can overheat. Damaged extension cables
should not be repaired; they should be replaced with an equivalent type.
WEER33 Instruction Manual.indd 6 20/10/2016 14:11