Webb WEER33 Operator's Manual & Parts List page 15

REMOVE AND REPLACE THE BLADE.
Block the rotation of the blade, using a good sixed piece of wood, which the blade cannot cut.
Hold the blade using gardening gloves (not provided) and spanner wrench (not provided) rotating
the spanner anti-clockwise.
Remove the bolt, washer and blade. Dispose of the old blade responsibly.
Attach a new blade, fastening with the washer and blade bolt. Ensure that the blade is correctly
positioned on the blade boss and then firmly tighten the bolt, clockwise.
CLEANING
Always remove the electric plug from the mains supply, before any cleaning is undertaken.
Carefully clean the underside of the deck with a stiff brush after each cut; remove the grass debris
and mud accumulated inside the deck to prevent it drying. Remove the belt casing by removing the
screws and clean around the transmission and drive belts with a brush or compressed air once or
twice a year. Do not use water on any part of the main machine!
WEER33 Instruction Manual.indd 15 20/10/2016 14:11