Load Control Interface - WESTECH VS Series Instruction Manual

 Load Control Interface
In the main menu interface, when press
moves between the interfaces of main menu 1 and main menu 2. When the inverse cursor
4．Load Set
rests on
with the following contents displayed.
﹡When set light control threshold voltage, it should meet the requirement :
DTTV (Day Time Threshold Voltage) >= NTTV (Night Time Threshold Voltage)+1V.
Notice: Adjust DTTV (OFF) first and then NTTV (ON).
▼
Manual control interface
↑/ +
Press
Manual
rests on in the load control interface, press
interface which displays the following contents. In manual control mode, the load will
work as previous setting when restart the controller.
in main menu 1, press
Manual
Light On / off
Light On + Timer
Time
↓/ -
or to choose load control mode. When the inverse cursor
Manual Control
↑/ +
or
ENTER/ →
ENTER/ →
OFF ON
25
↓/ -
, the inverse cursor
and enter load control interface
to enter manual control