Nominal Parameter Interface - WESTECH VS Series Instruction Manual

When save confirmation chosen, the indication of successful saving will occur as follows.
After parameters successfully saved, it returns to main menu interface.
 Nominal Parameter Interface
In the main menu interface, when press
moves between the interfaces of main menu 1 and main menu 2. When the inverse cursor
5．Rated Value
rests on
nominal parameter interface with the following contents displayed. In the interface,
battery type and capacity can be modified and the modification range is 1-999AH. Press
or
↑/ +
After confirmed, press
Press
↑/ +
choosing confirmation, press
saved or cancelled. When save cancellation is chosen, the inverse cursor moves back to
Time Control 2
On Time : 19 : 20 : 00
SAVE SUCCESS！
Off Time : 07 : 00 : 00
Double
in the main menu 1 interface, press
to modify the relevant parameters.
↓/ -
Batt : 12.0 V
Load : 10.0A
Type : Seal
ENTER/ →
or to choose save confirmation or save cancellation. After
↓/ -
ENTER/ →
Single
or
↑/ +
Rated Value
070AH
PV : 10.0A
Gel Flood
and the following picture appears.
again, and the modified parameters can be
31
, the inverse cursor
↓/ -
and enter into
ENTER/→