WESTECH VS Series Instruction Manual page 31

▼ L
ight control + timer control interface
↑/ +
Press
Light On + Timer
rests on
light control plus time control interface.
MENU/ ←
When press
parameters. When
interface and press
the inverse cursor rests on"Work Time" interface, can modification of the parameters be
saved. When modification is confirmed, press
appears. Press
cancellation. After choosing confirmation,
Press
ENTER/ →
save cancellation is chosen, the inverse cursor moves back to the main menu interface.
↓/ -
or to choose load control mode. When the inverse cursor
in the load control interface, press
Light Timer Control
On : 05.0 V Delay ：10 m
Off : 06.0 V Delay ：10 m
Work Time : 10 : 00 : 00
or ENTER/ →
is continuously pressed, it moves back to main menu
MENU/←
or
↑/ +
↑/ +
or
again, and the modified parameter can be saved or cancelled. When
Light Timer Control
On : 06.0 V Delay ：10 m
Save
Off : 05.0 V Delay ：10 m
Work Time : 10 : 00 : 00
, the inverse cursor moves among every
to modify every parameters. Only when
↓/ -
ENTER/ →
↓/ -
to choose save confirmation or save
Cancel
28
to enter into
ENTER/ →
,and the following picture