Device Setting Interface - WESTECH VS Series Instruction Manual

 Device Setting Interface
In the main menu interface, press
moves between interfaces of main menu 1 and main menu 2. When the inverse cursor
rests on 2．Device Set
system setting interface which displays the following contents. When setting in this
interface, real time clock will stop running. Please correct real time clock again after
parameters are changed.
In the interface, press
every parameter. When
back to main menu interface. When inverse cursor rests at some parameter, the contents
of the parameter can be modified. When modify date and time information, press
to increase the figure and press
backlight working mode, push
on-and-off time of LCD backlight can be set between 00~30 minutes. Only when the
inverse cursor moves to option of LCD backlight, can the modified parameters
information can be saved. Press
button
↑/ +
After choosing confirmation, press
saved or cancelled. If choose save cancellation, the inverse cursor returns to main menu
in the main menu interface 1, press
Device Set
Date :
Time : 12 : 24 : 23
Backlight : 10 Mins
MENU/ ← or
ENTER/ →
is continuously pressed, the inverse cursor moves
MENU/ ←
↓/ -
↑/ +
ENTER/ →
or to choose save confirmation or save cancelation.
↓/ -
ENTER/ →
or
↑/ +
↓/ -
12 – 05 - 2011
, the inverse cursor moves among
to reduce figure. When modify LCD
or
↓/ -
, then the following picture appears. Press
again, the modified parameters will be
20
, the inverse cursor
to enter into
ENTER/ →
, the automatic switch
↑/ +