Mount The Charger - Honeywell CT40-QBC Quick Start Manual

Mount the Charger

You can mount the charger on a flat, horizontal surface such as
a desktop or workbench with an optional DIN rail.
Mounting hardware required:
• DIN rail
• 3/16-inch diameter x 5/8-inch long pan head screw
• 1/2-inch OD x 7/32-inch ID x 3/64-inch thick washer
• 3/16-inch diameter nut
1. Slide the DIN rail into the slot on the bottom of the charger.
2. Secure the DIN rail to the flat surface with the hardware.
5