Connect Power - Honeywell Ct40 Quad Battery Charger Manual
Table of Contents
Connect Power
Use only a UL Listed power supply which has been qualified by
Honeywell with an output rated at 12 VDC and 3 A. The power
supply input rating is 100-240 VAC, 50/60 Hz. The operating
temperature is -10 °C to 50 °C (14 °F to 122 °F).
1.
Plug the power cord into the power supply.
2.
Plug the power supply cable into the power connector on
the back of the charger.
3.
Plug the power cord into a standard wall outlet.
Power Connector
2
Table of Contents
Need help?
Do you have a question about the CT40-QBC and is the answer not in the manual?