Summary of Contents for Honeywell ChargeBase CT40-CB
Page 1
CT40 ChargeBase and NetBase Model CT40-CB, CT40-NB Quick Start Guide CT40-CNB-EN-QS Rev A 08/18...
Page 2
ChargeBase or NetBase for service or if you want to store the charger while not in use. Caution: We recommend the use of Honeywell accessories and power adapters. Use of any non- Honeywell accessories or power adapters may cause damage not covered by the warranty.
Connect Power Use only a UL Listed power supply which has been qualified by Honeywell with an output rated at 12V/7A. The power supply input rating is 100-240 VAC, 50/60 Hz. The operating tempera- ture is -10 °C to 50 °C (14 °F to 122 °F). The maximum output for the base is 5VDC/2A.
Charge the Battery Pack Caution: Make sure that all components are dry prior to using the computers and batteries with accessories. Using wet components may cause damage not covered by the warranty. Mise en garde : Assurez-vous que tous les composants sont secs avant de connecter les terminaux/batteries à...
Mount the ChargeBase or NetBase You can mount the charger on a flat, horizontal surface such as a desktop or workbench with an optional DIN rail. Mounting hardware required: • DIN rail • 3/16-inch diameter x 5/8-inch long pan head screw •...
Patents For patent information, see www.hsmpats.com. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.