Mirage IAEH121A Owner's Manual page 31

Installation of indoor unit
Note:
• Pay attention to dust preven-
tion and take relevant safety
measures when opening the
hole.
• The plastic expansion
particles are not provided and
should be bought locally.
Step four: outlet pipe
1. The pipe can be led out in the
direction of right, rear right, left or
rear left.
right
Step five: connect the pipe indoor
unit.
1. Aim the pipe joint at the corre-
sponding bellmouth.
2. Pretightening the union nut with
hand.
3. Adjust the torque force by refer-
ring to the following sheet. Place the
open-end wrench on the pipe joint
and place the torque wrench on the
union nut. Tighten the union nut with
torque wrench.
Indoor
5-10
2. When select leading out the pipe
from left or right, please cut off the
corresponding hole on the bottom
case.
left
rear left
outdoor
cut off
the hole
pipe joint union nut
right
pipe
28