Tools For Installation; Selection Of Installation Location - Mirage IAEH121A Owner's Manual

Split air conditioner
Table of Contents

Advertisement

Tools for installation

1 Level meter
4 Drill head
7 Open-end wrench
10 Vacuum pump
13 Inner hexagon spanner
Note:
• Please contact the local agent for installation.
• Don't use unqualified power cord.

Selection of installation location

Basic requirement
Installing the unit in the following
places may cause malfunction. If it is
unavoidable, please consult the local
dealer:
1. The place with strong heat
sources, vapors, flammable or explo-
sive gas, or volatile objects spread in
the air.
2. The place with high-frequency
devices (such as welding machine,
medical equipment).
3. The place near coast area.
4. The place with oil or fumes in the
air.
5. The place with sulfureted gas.
6. Other places with special circum-
stances.
7. Do not use to unit in the immediate
surroundings of a laundry, a bath, a
shower or a swimming pool.
Outoor unit
1. Select a location where the noise and outflow air emitted by the outdoor unit will not
affect neighborhood.
2.The location should be well ventilated and dry, in which the outdoor unit won't be
exposed directly to sunlight or strong wind.
3. The location should be able to withstand the weight of outdoor unit.
4. Make sure that the installation follows the requirement of installation dimension
diagram.
5. Select a location which is out of reach for children and far away from animals or
plants.If it is unavoidable, please add the fence for safety purpose.
2 Screw driver
5 Pipe expander
8 Pipe cutter
11 Pressure meter
Indoor unit
1. There should be no obstruction
near air inlet and air outlet.
2. Select a location where the
condensation water can be dispersed
easily and won't affect other people.
3. Select a location which is
convenient to connect the outdoor
unit and near the power socket.
4. Select a location which is out of
reach for children.
5. The location should be able to
withstand the weight of indoor unit
and won't increase noise and
vibration.
6. The appliance must be installed
2.5m above floor.
7. Don't install the indoor unit right
above the electric appliance.
8. Please try your best to keep way
from fluorescent lamp.
3 Impact drill
6 Torque wrench
9 Leakage detector
12 Universal meter
14 Measuring tape
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Oaeh121aIaeh241aOaeh241a

Table of Contents