Sound Settings - Bang & Olufsen BeoSound 5 Manual

Volume
Preset a volume level (0–90) for your music
system.
Balance
Adjust the balance (9 <–> 9) between your
speakers.
Bass
Adjust the bass (–6 – +6) to your liking.
Treble
Adjust the treble (­6 – +6) to your liking.
Loudness
Switch the loudness feature on or off.
Speaker type
Select speaker type.
Store sound settings Press GO to store your settings. If you exit without storing, the setting is
reset after standby.
Volume 0 mutes the sound. It is not possible to store volume level 0 or volume
levels above 75.
Loudness
This setting compensates for the human ear's lack of sensitivity to high
and low frequencies at low volume.

Sound settings

Store your preferred sound settings. When you store a sound setting, your music
system starts playing at this level every time you switch it on.
Select SETTINGS in the MODE
menu
Select SETTINGS in the MODE
menu
Select SETTINGS in the MODE
menu
Select SETTINGS in the MODE
menu
Select SETTINGS in the MODE
menu
Select SETTINGS in the MODE
menu
Select VOLUME in the
SOUND menu
Select BALANCE in the
SOUND menu
Select BASS in the SOUND
menu
Select TREBLE in the SOUND
menu
Select LOUDNESS in the
SOUND menu
Select SPEAKER TYPE in the
SOUND menu
NOTE! While adjusting sound, the speakers
reacts according to the adjustment. The SOUND
setting are inaccessible if no speakers are
connected to BeoMaster 5.
11
Adjust and confirm volume
Adjust and confirm balance
Adjust and confirm bass
Adjust and confirm treble
Switch loudness ON or OFF
Select BEOLAB 5,
NO BEOLAB 5 or NONE