Cleaning - Wilfa CRUSH GO BBL-1200W Operating Instructions Manual

3. Insert the measuring cup into the lid opening.
4. Select the speed by turning the control knob or press the Quick-select
button.
Note: Do not let the appliance to operate more than 3 minutes continuously. Let the
appliance to cool down to room temperature before continue operating the appliance.
Note that BBL-1200B glas jar can only withstand temperatures up to 60° C.
After using the blender
1. Disconnect the power from main supply.
2. Remove the lid (together with measuring cup) from the jar.
3. Remove the jar (together with blade assembly unit interface) from the
motor part.
4. Detach the blade assembly unit interface from the bottom of the jar.
Note: Always clean the removable parts immediately after use.
Note: It is recommended to cut the meat or other food into smaller pieces before
putting them in the jar. Do not operate with large quantities of food at one time.

Cleaning

Always clean the removable parts immediately after use.
Note: Be careful when cleaning the parts. Avoid touching the sharp blades!
1. Disconnect the power from main supply.
2. Disassemble all removable parts before cleaning.
3. Clean all removable parts in dishwasher or in lukewarm water with
dishwashing liquid.
4. Use dry cloth to clean the main body.
11
P.