Set The Print Specifications - Hitachi IJ RX2-SD160 Instruction Manual

4.14 Set the print specifications

4.14.1 Set the character height, character width, and orientation
(1) Function
● Sets the character height, character width, character orientation, and print start.
Print specifications
Screen
Message name [ ]
switching
Character
orientation
Printing method １（１：Single scan ２：Interlaced ３：Mixed）
Print start
delay
Print start delay
Character height
1
● The character height can be specified.
Ink drop use percentage
2
● Sets the ratio of drops used in printing. For example, ink drop use 1/3 prints at a ratio of 1 in 3 ink
drops. The 2 ink drops are recovered from the gutter.
Model type
RX2-B
RX2-S
● When ink drop use is 1/1 or 1/2, high speed printing is possible. For ink drop use 1/16, low speed
printing is performed and the print quality improves.
● When Format setup is Free layout on the Change message screen, setting range of ink drop use
percentage is 1/2 to 1/16.
Character width
3
● The character width can be specified.
● The character width setting range is from 0 to 3999.
● When the product speed matching feature is incorporated (when the rotary encoder is connected),
set the character width as indicated below.
Ink drop use percentage setting
4-71 ●Set the print specifications
[Stop ]
1st screen 2nd screen 3rd screen
Character height
Ink drop use
Character width
0:ＡＢＣ 1:ＡＢＣ 2:
→ ← ←
Sensor Print start
００００
（0〜9999）SC
Setting range of ink drop use percentage
1 line
1/3 to 1/16
1/2 to 1/16
1/1
1/2
1/3 to 1/16
2015.07.07 12:45
Com=0
M
Manual
８５
（0〜99）
０３
（1/1〜1/16）
００００ （0〜3999）
Arrow : Prin-
3:
→
ting direction
Change unit
2 lines 3 lines
1/4 to 1/16 1/4 to 1/16
1/2 to 1/16 1/2 to 1/16
Character width setting
002 *
001
000
Startup
HOME
Edit
message
Print
Changes the print start
format
delay input units.
Back
Notes
-
Option : Up to 1/1