Set The Print Specifications - Hitachi RX Instruction Manual

4.13 Set the print specifications

4.13.1 Set the character height, character width, and orientation
(1) Function
●Sets the character height, character width, character orientation, and print start.
Print specifications
Screen
Message name [ ]
switching
Character
orientation
Printing method １（１：single scan ２：interlaced）
Print start
delay
Print start delay
Character height
1
●The character height can be specified.
Ink drop use percentage
2
●Sets the ratio of drops used in printing. For example, ink drop use 1/3 prints at a ratio of 1 in 3 ink
drops. The 2 ink drops are recovered from the gutter.
Model type
RX-B
RX-S
●When ink drop use is 1/1, high speed printing is possible. For ink drop use 1/16, low speed printing is
performed and the print quality improves.
Character width
3
●The character width can be specified.
●The character width setting range is from 0 to 3999.
●When the product speed matching feature is incorporated (when the rotary encoder is connected),
set the character width as indicated below.
Ink drop use percentage setting
For rotary encoder wiring and setup, see the Technical Manual "4.3.2-1 Rotary encoder
●
specifications, wiring and switch setting".
4-60 ●Set the print specifications
[Stop ]
1st screen 2nd screen 3rd screen
Character height
Ink drop use
Horizontal
size
Character width
0:ＡＢＣ 1:ＡＢＣ 2:
→ ← ←
Sensor Print start
００００
（0∼9999）SC
Setting range of ink drop use percentage
1 line
1/3 to 1/16
1/2 to 1/16
1/1
1/2
1/3 to 1/16
2015.07.07 12:45
Com=0
M
Manual
８５
（0∼99）
０３
（1/1∼1/16）
００００ （0∼3999）
Arrow : Prin-
3:
→
ting direction
Change unit
2 lines Notes
1/4 to 1/16 -
1/2 to 1/16 Option : Up to 1/1
Character width setting
002
001
000
Startup
HOME
Edit
message
Print
format
Changes the print start
delay input units.
Back