Touch Screen Coordinate Correction - Hitachi IJ RX2-SD160 Instruction Manual

7.4 Touch screen coordinate correction

(1) Functions
●Corrects touch screen and screen coordinate position offset.
(2) Operation
1
Press Calibrate touch screen coordinates in the auxiliary functions menu.
The Touch screen coord. screen is displayed.
Touch screen coord.
Carefully touch the intersection of
2 Press the + at the top left and bottom right of the screen until the Touch Screen
Coordinate Correction message is displayed.
The Touch Screen Coordinate Correction message is displayed.
Touch screen coordinate correction will be applied.
To return to the previous setting, press [Cancel].
OK
3
Press OK .
The coordinates are corrected and the touch screen returns to the auxiliary functions menu.
7-28 ●Touch screen coordinate correction
[Stop ]
the crosshairs.
＝＝＝＝＝
Touch Screen Coordinate Correction
2015.07.07 12:45
Com=0
Cancel
＝＝＝＝＝
Cancel