Ready And Standby State Switching Operation - Hitachi IJ RX2-SD160 Instruction Manual

3.1.3 Ready and Standby state switching operation

(1) "Ready" state → "Standby" state switching
● With the conveyor interlock being activated by "Ready" signal, should this "Ready" signal be
turned to "Standby", the conveyor will stop.
1
Press the Manual
Standby → OK .
Solution Press <OK> to abort.
Press OK .
. The Manual Control menu appears. Press the
M
Manual
2015.07.07 12:45
Com=0
M
Manual
＝＝＝＝＝ Manual Control Menu
Start
The current message is
printing
printed.
＝＝＝＝＝
Print Abort Confirmation
Printing will be aborted.
OK
Press Manual .
Startup
Press Standby .
＝＝＝＝＝
No-cleaning Stops ink ejection
stop without cleaning.
No deflection voltage is
Standby applied. The printer
status becomes Standby.
＝＝＝＝＝
Cancel
Cancel
●Start operation 3-10