Hitachi IJ RX2-SD160 Instruction Manual page 50

4. CREATION AND PRINTING OF MESSAGES
4.1 Print description screen (initial screen)
(1) Overview
● The display is shifted to the screens for message edit and Maintenance, Auxiliary function, and
Environment setup menu screens by pressing each button.
● The print image can be confirmed at the "Print layout" area.
Change message
Select message
Overwrite message
Adjust print parameters
Operation management
Maintenance
Auxiliary function
Environment setup menu
Select login user
Create/Edit message
Print count reset
Displays the scroll.
Displays the zoom in
or zoom out.
Displays the
print layout.
Displays the operation
management
information.
4-1 ●Print description screen
Item
● Edits and corrects current message.
● Calls and prints saved messages.
● Overwrites the current message.
● Creates and edits messages different from the current message.
● Displays operation status.
● Displays the maintenance menu.
● Displays the auxiliary functions menu.
● Displays the environment setup menu
● Logs in again as a different user from currently logged in user.
● Creates and edits messages different from the current message.
● Reset the print count to zero (0).
Print description
Message name[ ]
《
−
Ink operating time １００(hours)
Cumulative op. time １００(hours)
Print count １０００(prints)
Ink pressure ０．０００(MPa；standard value:０．２５０)
Change
Select
message
message
Auxiliary
Maintenance
function
Description
The Shutdown is displayed
during ink ejection.
The Startup is displayed
during stop.
[Stop ]
Current user ID : user2
Overwrite Adjust print
message parameters
When the Menu is pressed,
the display is switched.
Environment Select
setup menu
login user
2015.07.07 12:45
Com=0
M
Manual Shutdown
2015.07.07 12:45
Com=0
M
》
Manual Startup
＋
Inter-
laced
Print count
reset
Operation
Menu
management
Create/Edit
message
Reference
4.2
4.3
4.4
4.14.4
5.2
5
7
6
6.4
4.5
4.1
For details
regarding the
printing method
display, refer to
"4.14.1 Set the
character
height,
character width,
and
orientation."
Print count is
reset to 0.
If is indicated in
off-line state.