Controlnode - BMPRO J35B-L Owner's Manual

CONTROLNODE

How do I clear the memory of my ControlNode?
To clear the ControlNode memory, press and hold the pairing button on the side
of the ControlNode for 10 seconds.
While the memory is being cleared, the ControlNode LED Status Indicator will
flash red.
Once the memory is cleared, the ControlNode LED Status Indicator will flash
green.
When the memory on the ControlNode is cleared, the Bluetooth connection to
all mobile devices paired to but not in Bluetooth range of the ControlNode will
be lost. To use the JHub App on these devices again, they will need to be re-
paired.
26