Pairing With The Controlnode - BMPRO J35B-L Owner's Manual

PAIRING WITH THE CONTROLNODE

To pair the ControlNode to your own personal mobile device:
1.
Make sure that the ControlNode is connected to the J35 and that the J35 is
powered on.
2.
Turn on Bluetooth on your own personal device
3.
Press the Pairing Button on the ControlNode. The LED Status Indicator on the
ControlNode will flash green, indicating you have 30 seconds to pair to the
ControlNode.
4.
Launch the JHub App and press scan at the prompt.
5.
The JHub App will now search for nearby ControlNode devices. A pop-up
window will appear listing ControlNode devices available for connection.
6.
Select the device with the number that corresponds to the last six digits of
the serial number of the ControlNode you wish to pair to.
When successfully paired, the LED Status Indicator on the ControlNode will turn
off and the Bluetooth Connectivity icon in the JHub App will turn blue.
The ControlNode can simultaneously pair to five mobile devices, including the
JHub Tablet. If the ControlNode is already paired to and in Bluetooth range
with five mobile devices, the LED Status Indicator on the ControlNode will flash
orange for one second. The ControlNode will need to be cleared of devices in
order to pair a new one.
For information on how to clear the ControlNode's memory, refer to FAQs and
Troubleshooting.
22