Advertisement
Step 26. Install the Front Panel Overlays.
Step 27. Install the Jumper Cables.
Step 28. Position the Cables and Wires to Prevent Pinching.
Step 29. Reinstall the Inner Cover.
Step 30. Reinstall the Outer Cover.
Step 31. Install the Cable Guard.
Step 32. Remove Option 224 and Option 219 Licenses.
Step 33. Enable Options P04, 419, and 423.
Step 34. Perform Post-Upgrade Adjustments and Calibration.
Step 35. Prepare the PNA for the User.
Step 1.Obtain a Keyword and Verify the Information
Follow the instructions on the Option Entitlement Certificate supplied to obtain a license key for
installation of this upgrade. Refer to
Verify that the model number, serial number, and option number information on the license key
match those of the instrument on which this upgrade will be installed.
If the model number, serial number, or option number do not match those on your license key, you
will not be able to install the option. If this is the case, contact Keysight for assistance before
beginning the installation of this upgrade. Refer to
Once the license key has been received and the information verified, you can proceed with the
installation at step 2.
Step 2.Remove the Outer Cover
For instructions, click the Chapter 7 bookmark "Removing the Covers" in the PDF Service Guide
Step 3.Remove the Inner Cover
For instructions, click the Chapter 7 bookmark "Removing the Covers" in the PDF Service Guide
Step 4.Remove the Front Panel Assembly
For instructions, click the Chapter 7 bookmark "Removing and Replacing the Front Panel
Assembly" in the PDF Service Guide
"Downloading the Online PNA Service Guide" on page 5
1. See
Installation Note N5242-90017
"License Key Redemption" on page
"Contacting Keysight" on page
1
.
Installation Procedure for the Upgrade
4.
.
3.
1
.
1
.
12
Advertisement
