Download Print this page
Valcom VIP-176A-IC Manual

Valcom VIP-176A-IC Manual

Informacast compliant sip door intercom

Advertisement

Quick Links

INTRODUCTION
The VIP-176A-IC InformaCast Compliant SIP
Talkback Door Intercom allows communication to
SIP-based telephone systems or Valcom
Enhanced Station Port adapters via an IP-based
network.
SPECIFICATIONS
Access Methods
InformaCast Server
SIP – enabled telephone system
PBX, FXO Port w/Valcom Enhanced Station
Port
POTS telephone set w/Valcom Enhanced
Station Port
Valcom M Cast Page Group
Features
RJ-45 for network connection
1 Form C Smart Relay (optional)
Network activity LEDs
Power over Ethernet (PoE) 802.3af
compatible
Dimensions/Weight:
4.88" H x 4.88" W x 2.5" D (including button)
(12.4cm H x 12.4cm W x 6.4cm D)
Weight: 0.82 lbs. (0.37 kg)
Nominal Power Requirements
Via 802.3af PoE Ethernet Switch:
Environment
Network Interface:
Temperature:
Humidity:
0 to 85% non-precipitating
Suitable for indoor or outdoor installation,
protected from direct precipitation.
VIP-176A-IC
®
InformaCast
SIP Door Intercom
Precautionary Designations
FCC Information
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This
equipment generates uses and can radiate
Class 3
radio frequency energy and if not installed
and used in accordance with the instruction
manual, may cause harmful interference to
radio communications. Operation of this
0 to +40° C
equipment in a residential area may cause
harmful interference in which case the user
will be required to correct the interference at
his own expense.
1
Compliant
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: To reduce the risk of electric shock,
Do not remove cover.
No user serviceable parts inside.
Refer servicing to qualified service personnel.
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
ISSUE 1
947572

Advertisement

loading

Summary of Contents for Valcom VIP-176A-IC

  • Page 1 ISSUE 1 VIP-176A-IC ® InformaCast Compliant SIP Door Intercom INTRODUCTION The VIP-176A-IC InformaCast Compliant SIP Talkback Door Intercom allows communication to SIP-based telephone systems or Valcom Enhanced Station Port adapters via an IP-based network. Precautionary Designations SPECIFICATIONS Access Methods CAUTION ...
  • Page 2 SIP registration to a voice over IP (VoIP) telephone system, or FXO port (when used with a Valcom Enhanced Station Port). Pressing the call button on the door plate initiates a call to a user- specified telephone number and the call assurance LED on the door plate begins to flash.
  • Page 3 Status Indicator Lights TECHNICAL ASSISTANCE The VIP-176A-IC Door plate is equipped with a Assistance in troubleshooting is available from status indicator LED. LED flashes when the call the factory. Call (540) 563-2000 and press 1 for button is pressed and steady when the call is Technical Support or via email at connected.