Download Print this page
Valcom VIP-176A Manual

Valcom VIP-176A Manual

Sip door intercom

Advertisement

Quick Links

VIP-176A SIP Door Intercom
INTRODUCTION
The VIP-176A SIP Talkback Door Intercom
allows communication to SIP-based telephone
systems or Valcom Enhanced Station Port
adapters via an IP-based network.

SPECIFICATIONS

Access Methods
SIP – enabled telephone system
PBX, FXO Port w/Valcom Enhanced Station
Port
POTS telephone set w/Valcom Enhanced
Station Port
Valcom M Cast Page Group
Features
RJ-45 for network connection
1 Form C Smart Relay (optional)
Network activity LEDs
Power over Ethernet (PoE) 802.3af
compatible
Dimensions/Weight:
4.88" H x 4.88" W x 2.5" D (including button)
(12.4cm H x 12.4cm W x 6.4cm D)
Weight: 0.82 lbs. (0.37 kg)
Nominal Power Requirements
Via 802.3af PoE Ethernet Switch:
Environment
Network Interface:
Temperature:
Humidity:
Suitable for indoor or outdoor installation,
protected from direct precipitation.
Class 3
0 to +40° C
0 to 85% non-precipitating
Precautionary Designations
RISK OF ELECTRIC SHOCK
CAUTION: To reduce the risk of electric shock,
No user serviceable parts inside.
Refer servicing to qualified service personnel.
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.

FCC Information

This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This
equipment generates uses and can radiate
radio frequency energy and if not installed
and used in accordance with the instruction
manual, may cause harmful interference to
radio communications. Operation of this
equipment in a residential area may cause
harmful interference in which case the user
will be required to correct the interference at
his own expense.
1
CAUTION
DO NOT OPEN
Do not remove cover.
ISSUE 1
947550

Advertisement

loading

Summary of Contents for Valcom VIP-176A

  • Page 1: Specifications

    ISSUE 1 VIP-176A SIP Door Intercom INTRODUCTION The VIP-176A SIP Talkback Door Intercom allows communication to SIP-based telephone systems or Valcom Enhanced Station Port adapters via an IP-based network. SPECIFICATIONS Access Methods Precautionary Designations  SIP – enabled telephone system ...
  • Page 2 5333-0 could be used. (See Figure 2) Power Connections Figure 2. The only method of powering the VIP-176A is via a Power over Ethernet (PoE) switch or power injector meeting the 802.3af specification. Make all required signal connections before connecting to Ethernet switch or power injector meeting the 802.3af specification.
  • Page 3: Technical Assistance

    Status Indicator Lights TECHNICAL ASSISTANCE The VIP-176A Door plate is equipped with a Assistance in troubleshooting is available from status indicator LED. LED flashes when the call the factory. Call (540) 563-2000 and press 1 for button is pressed and steady when the call is Technical Support or via email at connected.