9. Additional information
9.1. Heatmiser thermostat
9.1.1. Overview
Set Temperature
This is the temperature the thermostat is currently controlling to. At any time, you can press the Up/Down arrow key
and the display will show the set Temperature for 30 seconds.
9.1.2. Wiring diagram
9.1.3. Technical Details
Large display
Automatic blue back-light (Turns off after 30 seconds)
Flush mounting
Self Learning Optimum Start (Heating Mode only)
°C / °F Selectable
Heating, Cooling and Automatic modes available
30 minute timing increments
5 day/2 day Program
(Weekday/Weekend programming)
Up to 4 changes in room temperature
Fan speed: Auto, High, Medium, Low
Heating Output, Cooling Output, Frost protection
Easily increase or decrease the required temperature
Temperature range 05°C - 35°C
Supply: 230v / 110v
Outputs: 230v / 110v
Page 18 of 25