Safety Measures - Vitek VT-2216 Instruction Manual

T-2216_IM_70x130.indd 3
MANICURE SET VT-2216
Manicure and pedicure set is intended for full cycle nail care.
DESCRIPTION
1. AC/DC adapter connection socket
2. Attachment rotation direction/power switch
3. Attachment rotation speed scale
4. Motor unit body
5. Attachment rotation speed decrease button
6. Attachment rotation speed increase button
7. Illumination
8. Felt cone
9. Large cone attachment
10. Pointed attachment
11. Small cone attachment
12. Fine disk
13. Coarse disk
14. Rough skin removing attachment
15. Power adapter
16. Storage case

SAFETY MEASURES

Before using the manicure set, read this instruction carefully
and keep it for further reference. Use the unit for its intended
purpose only, as specified in this manual. Mishandling the
unit can lead to its breakage and cause harm to the user or
damage to his/her property.
• Before plugging the unit in make sure that the adapter
operating voltage corresponds to the voltage of your
mains.
• Do not use the unit if your skin or nails are damaged.
• If you have diabetes or vascular disease, consult your
doctor before using the unit.
• To ensure proper operation of the unit, it is recommend-
ed to switch it off for 15 minutes after every 20 minutes
of continuous operation.
• Do not use the unit near heat sources or open flame.
• Make sure that the power adapter cord does not touch
hot surfaces or sharp edges of furniture.
• To avoid electric shock do not immerse the power
adapter into water or any other liquids.
ENGLISH
3
29.12.2017 14:22:33