Uploading Coordinate Data - Nikon NPL-322 Instruction Manual

5 Menu Key
As each record in the current job is output from the
instrument (downloaded), the current line number is
updated.
After downloading is completed, you can choose to
delete the current job.
To delete the current job, press
Basic Measurement Screen (BMS), press
Abrt

Uploading coordinate data

To upload coordinate data from a computer, press
select
The default data format appears. To change the order
of data fields, press the
information, see
order for upload, page
Otherwise, just press
Press the Job softkey to go to the Job Manager screen. For more information, see
To change the communication settings, press the
softkey. The serial port settings must match the settings
used by the terminal software on the computer.
Use an RS-232C cable to connect the instrument to the
computer.
The Free space field shows the number of points that
can be stored.
Press
use the Send Text File command in the terminal program on the computer to start
sending data.
In the terminal program, set flow control to Xon/Xoff.
1 3 4 Total Station NPL-322 Instruction Manual
softkey.
in the Communication menu.
Upload XYZ
Edit
Advanced feature: Editing the data
135.
.
[ENT]
to put the instrument in receive mode. Then
[ENT]
. To return to the
[4]
or the
[ESC]
[2]
softkey. For more
Comm
or
Job Manager, page 98.