Table of Contents
Advertisement
H30 - CATV & DOCSIS3.0 Meter / Analyzer
14.2. Configuration
Press
to change LT Monitoring options.
- Measure delay: Select the time interval
between two consecutive measure shots.
Minimun value is 5 seconds.
- Measure 1, 2, 3: Allows select the three
measures that the user wants to visualize in
the main window:
15. FM Scan
The H30's FM Scan feature sweeps of the FM
carriers on the frequency range from 87.5 to 108
MHz.
Once located, the H30 makes a continuous update
of the level of eacf carrier.
15.1.Main Window
Below is a capture of a FM Scan window with a brief
explanation of its features:
Selected channel
Change using
Bar graph showing the FM
carriers found
16. Wi-Fi Analyzer
(Opt. 593213 or Ref. 593180)
Analyzes the W-Fi band and automatically detects
all the Wi-Fi networks.
This feature automatically identifies the wifi
networks as either their name and the power of
the access point's signal.
There are two different screens to display the
information.
The first screen shows a graph with several
triangles, each triangle corresponds to a Wi-Fi
network, the height represents the power of each
access point's signal. The graph also shows the
network's names and the range of frequency used.
The second screen shows a list with all the Wi-Fi
networks found. The list shows the name of all the
Wi-Fi networks, as well as the channel, the power
and the MAC of each one.
Level of the selected
carrier
24
Advertisement
Table of Contents
