Table of Contents
Advertisement
H30 - CATV & DOCSIS3.0 Meter / Analyzer
- Save datalog: Saves the current scan
measurements. You can see the datalogs
using the remote control application.
2.3. Upstream RF
Help identify reverse path problems in the
upstream RF signal.
2.3.1. Main window
Below is a capture of an Ingress Scan window with
a brief explanation of its features:
Selected frequency
Change using
Red graph:
Yellow mark:
max-hold
indicates
Orange graph:
the selected
real-time
frequency in
Green graph:
the spectrum
min-hold
2. Channel Info
Analog and digital channels are very different in
terms of signal content and power distribution
and thus require the advanced SLM techniques
Level of the
selected
frequency
Red line:
indicates
the current
maximun
level
provided in the Televes H30.
In analog mode, video and audio levels, V/A and
Carrier to Noise (C/N) are measured.
In digital mode it´s Power, C/N, Pre-BER and
Post-BER.
2.1. Main window
Below is a capture of a Channel Info window with a
brief explanation of its features.
Channel
Change using
Frequency
List of measurements
with pass/fail indicators
2.2. Setup
Press
to change the Channel Info options.
- Tuning: Channel, Frequency
- A/D: Auto, Analog, Digital
Channel
plan
Bar graph of main
measurement.
Color according to
checkmarks
14
Advertisement
Table of Contents
