Advertisement
13
Attach light pan onto the plate on motor,
aligning the keyhole slots on the light
plate with the preassembled screws on
the plate. Twist clockwise till lock.
Reinstall the screw removed in step 12.
Tighten all screws securely.
HAND HELD INSTALL
16
Place battery cover over battery
compartment and buttons. Place remote
over 2 pins on front cover. Attach cover
of remote by placing over 4 pins and
snapping into place.
© 2013 Monte Carlo Fan Company
14
Light pan
LED light kit
Connect white wire from fan to white wire
from LED light kit and then connect blue
wire from fan to black wire from LED
light kit.
Attach LED light kit to light pan by
locating dimples in light pan with grooves
on the LED light kit and twist clockwise
until tight.
17
Install wall control unit to outlet box using
machine screws provided.
Blue
White
White
Black
WALL MOUNT INSTALL
5
15
Battery cover
Battery
Remove battery cover. Install 12V battery
into wall remote. Duracell MN21 /
Evereday A23 / GP 23A all 12V. Attach
cover of remote by placing over buttons
and snap the battery cover in place.
18
Attach front cover to wall control unit with
screws provided. Snap battery cover in
place
12/2017
Advertisement
