Maruyama LB300 Owner's/Operator's Manual page 6

COVERAGE
Maruyama Manufacturing Company, Inc. warrants to the ultimate purchaser and each subsequent
purchaser that your small off-road engine will be designed, built and equipped, at the time of sale, to meet all
applicable regulations. Maruyama Manufacturing Company, Inc. also warrants to the initial purchaser and
each subsequent purchaser that your small off-road engine is free from defects in materials and
workmanship which cause the engine to fail to conform with applicable regulations for a period of 5 years.
The 1997 and later model years, EPA requires manufacturers to small off-road engines for 5 years. These
warranty periods will begin on the date the small off-road engine is purchased by the initial purchaser. If
any emission-related part on your engine is defective, the part will be replaced by Maruyama
Manufacturing Company, Inc. at no cost to the owner.
Maruyama Manufacturing Company, Inc. shall remedy warranty defects at any authorized Maruyama
Manufacturing Company, Inc. engine dealer or warranty station. Any authorized work done at an
authorized dealer or warranty station shall be free of charge to the owner if such work determines that a
warranted part is defective. Any manufacturer-approved or equivalent replacement part may be used for
any warranty maintenance or repairs on emission-related parts, and must be provided free of charge to the
owner if the part is still under warranty, Maruyama Manufacturing Company, Inc. is liable for damages to
other engine components caused by the failure of a warranted part still under warranty.
EPA considers emission-related warranted parts to include all the parts listed below. These warranted
parts are: the carburetor assembly, the ignition coil assembly, the ignition rotor, the spark plug,
the catalytic converter, and the fuel tank.
MAINTENANCE REQUIREMENTS
The owner is responsible for the performance of the required maintenance as defined by the Maruyama
Manufacturing Company, Inc. in the owner's/operator's manual.
LIMITATIONS
This Emission Control System Warranty shall not cover any of the following:
(a) repair or replacement required because of misuse or neglect, lack of required maintenance, repairs
improperly performed or replacements not conforming to Maruyama Manufacturing Company, Inc.
specifications that adversely affect performance and/or durability, and alterations or modifications not
recommended or approved in writing by Maruyama Manufacturing Company, Inc., and
(b) replacement of parts and other services and adjustments necessary for required maintenance at and
after the first scheduled replacement point.
Part II: CALIFORNIA EMISSIONS CONTROL WARRANTY STATEMENT
CALIFORNIA EXHAUST AND EVAPORATIVE EMISSION CONTROL WARRANTY
STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS
The California Air Resources Board and Maruyama Manufacturing Company, Inc. are pleased to explain the
exhaust and evaporative emissions ("emissions") control system warranty on your 2021 small off-road
engine. In California, new equipment that use small off-road engines must be designed, built, and equipped to
meet the State's stringent anti-smog standards. Maruyama Manufacturing Company, Inc. must warrant the
emissions control system on your small off-road engine for the periods of time listed below provided there has
been no abuse, neglect or improper maintenance of your small off-road engine or equipment leading to the
failure of the emissions control system.
Your emissions control system may include parts such as the carburetor or fuel-injection system, the ignition
system, catalytic converter, fuel tanks, fuel lines (for liquid fuel and fuel vapors), fuel caps, valves, canisters,
filters, clamps and other associated components. Also included may be hoses, belts, connectors, and other
emission-related assemblies.
The evaporative emission warranty parts list shall include all parts whose failure would increase evaporative
emissions, and may contain, but is not limited to, the following parts: Fuel Tank, Fuel Cap, Fuel Lines (for
liquid fuel and fuel vapors), Fuel Line Fittings, Pressure Relief Valves, Control Valves, Vacuum Control
Diaphragms, Purge Valves, Carburetor Purge Port Connector.
<4>