System Requirements - SAGEMCOM SE681 WiMAX User Manual

System requirements

SE681 WiMAX with outdoor antenna
PC with SE681 WiMAX
When used with the integrated antenna or the outdoor antenna, the
i
SE681 WiMAX complies with the regulations on limiting the effect of
electromagnetic fields on the general population.
System requirements
To use the SE681 WiMAX, the following requirements have to be fulfilled.
You will need a PC that meets the following requirements:

– PC with a free LAN interface 10/100BaseT (network adapter). The network
adapter on the configuration PC must support one of the following modes:
10BaseT Half Duplex, 10BaseT Full Duplex, 100BaseT Half Duplex, 100BaseT
Full Duplex. The TCP/IP protocol has to be set up on the PC (standard installa-
tion for Windows XP and Windows Vista; if you are using a different Windows
operating system, read the separate instructions on network configuration, if
necessary).
– A Web browser is installed on the configuration PC (e.g. Internet Explorer or
Mozilla Firefox).
To access the Internet you will need to register your SE681 WiMAX with a WiMAX

Internet provider.
14
WiMAX network
base station