SAGEMCOM SE681 WiMAX User Manual page 10

Product overview
For information about the optional outdoor antenna, please refer to "Connecting the

outdoor antenna" on page 15.
For information on connecting the mains adapter, please refer to "Switching on the

devices" on page 17.
For information on the reset button, please refer to "Restarting and resetting the

SE681 WiMAX" on page 17.
For information on the Ethernet port, please refer to "Connecting the PC" on

page 16.
LEDs
Online: active connection
Power: power supply
The LEDs indicate the status of the SE681 WiMAX and the current signal strength.
Name
Power: power
supply
Online: active
connection
LAN: Ethernet
port
10
LAN: Ethernet port
LED
Lights up green
Does not light up
Lights up green
Does not light up
Flashes green
Lights up red
Lights up green
Does not light up
Flashes green
RSSI: signal quality
Meaning
The SE681 WiMAX is powered correctly.
The SE681 WiMAX is not powered correctly
or the power supply has failed.
The SE681 WiMAX is registered with a
WiMAX network and ready for use.
The SE681 WiMAX is not registered with a
WiMAX network; it is not possible to estab-
lish an Internet connection.
The SE681 WiMAX is establishing a connec-
tion with a WiMAX network.
The SE681 WiMAX is not ready. Possible
cause: device is overheating or faulty.
Correct cable connection with a powered
connection partner.
No or incorrect cable connection.
Data transfer via the Ethernet port.