Table of Contents
Advertisement
Name
RSSI:
signal quality
The connection quality can be detected in two different ways:
CINR (Carrier to Interference and Noise Ratio) measures the signal
quality.
i
RSSI (Received Signal Strength Indication) measures the signal
strength.
The LEDs indicate either RSSI or CINR values. The used method is pre-
configured by your operator. If RSSI is used the RSSI 1 - RSSI 4 LEDs
will show the signal strength.
LED
0 to 4 LEDs light
up green
All 4 LEDs flash
green
Meaning
The LEDs on the SE681 WiMAX help you to
position the antenna more easily. The LEDs
indicate the signal quality; the more LEDs
that light up, the better the signal reception.
The SE681 WiMAX is being reset to the fac-
tory settings; see "Returning the SE681
WiMAX to factory settings" on page 18.
Product overview
11
Advertisement
Table of Contents
