Rear Ballast; Maximum Masses - Kubota BX2350D Operator's Manual

42 TIRES, WHEELS AND BALLAST
BRear Ballast
Add weight to rear wheels if needed to improve traction or
for stability. The amount of rear ballast should be matched
to job and the ballast should be removed when it is not
needed.
The weight should be added to the tractor in the form of
liquid ballast.
C Liquid Ballast in Rear Tires
Water and calcium chloride solution provides safe
economical ballast. Used properly, it will not damage tires,
tubes or rims. The addition of calcium chloride is
recommended to prevent the water from freezing. Use of
this method of weighting the wheels has the full approval
of the tire companies. See your tire dealer for this service.
Liquid weight per tire (75 percent filled)
Tire sizes
Slush free at -10
Solid at -30
[Approx. 1 kg
Cacl per 4 L of water]
Slush free at -24
Solid at -47
[Approx. 1.5 kg
Cacl per 4 L of water]
Slush free at -47
Solid at -52
[Approx. 2.25 kg
Cacl per 4 L of water]
A Do not fill tires with water or solution more than 75% of
full capacity (to the level of valve stem at 12 o'clock
position).
(1) Air (A) Correct : 75% Full
(2) Water
(3) Valve stem (B) Incorrect : 100% Full
A To avoid damage of transmission, do not use rear
wheel weights and liquid ballast at the same time.
26x12.00-12
45 kg
50 kg
56 kg
Air compresses like a cushion
Water can not be compressed
BMaximum Masses
(See "APPENDICES" section.)