4. Lock the auxiliary hydraulic control lever
in "NEUTRAL" position. (if equipped)
(1) Auxiliary hydraulic control lever
(2) Lock lever
5. Move
the
hydraulic
forward. (With the implement in place.)
To lower implement, move the hydraulic control lever
forward.
Check that implement is down at lowest position.
(1) Hydraulic control lever
(A) "LOCK"
control
lever
(A) "DOWN"
OPERATING THE ENGINE
6. Set the throttle lever to about 1/2 way.
(1) Hand throttle lever
7. Insert the key into the key switch and
turn it "ON".
"OFF"
"ON"
11
"INCREASE"
"DECREASE"
"PREHEAT"
"START"