Peripheral Devices - Sharp MX-M314N Operation Manual

PERIPHERAL DEVICES

This section describes the peripheral devices that can be used with the machine and explains how to use the finisher, as
well as Sharp OSA (application communication module and external account module).
PERIPHERAL DEVICES
Peripheral devices can be installed on the machine to increase its range of functionality.
The peripheral devices are generally optional, however, some models include certain peripheral devices as standard
equipment.
Product name
Document cover
Reversing single pass feeder
(Automatic document feeder)
Stand/500 sheet paper drawer
Stand/2x500 sheet paper drawer
Low stand
High stand
JOB SEPARATOR
Exit tray unit
(Right tray)
Finisher
Printer expansion kit
Network scanner expansion kit
Barcode font kit
PS3 expansion kit
Internet fax expansion kit
Facsimile expansion kit
Application integration module
Application communication module
External account module
Product number
MX-VR11 This holds down the original.
This automatically turns the original over to enable scanning of
MX-RP15
both sides.
MX-DE17 Additional tray. A maximum 500 sheets of paper can be loaded.
Additional tray. A maximum 500 sheets of paper can be loaded
MX-DE18
in each tray.
MX-DS16
These are stands on which the machine is set.
MX-DS17
This enables separation of output locations by mode (copy,
MX-TR11
printer, etc.).
When a finisher is installed, this can be added to the right side of
MX-TE10
the machine.
Output device that enables the use of the staple function and
MX-FN23
offset function.
Adds a PCL6 printer function. To install this kit, the hard disk
MX-PB15
drive is required.
MX-NSX1 Adds a network scanner function.
MX-PF10 Adds barcode fonts to the machine.
Enables the machine to be used as a Postscript compatible
MX-PK11
printer.
MX-FWX1 Enables Internet Fax.
MX-FX11 Adds a fax function.
The application integration module can be combined with the
MX-AMX1 network scanner function to append a metadata file to a scanned
image file.
This allows the machine to be linked over a network to an
MX-AMX2
external software application.
This is required to use an external account application on the
MX-AMX3
machine.
1-40
BEFORE USING THE MACHINE
(As of March, 2012)
Description
Contents