Broadcast Transmissions That Include Internet Fax Destinations - Sharp MX-M314N Operation Manual

BROADCAST TRANSMISSIONS THAT INCLUDE
INTERNET FAX DESTINATIONS
When a broadcast transmission includes both scan mode and Internet Fax mode destinations, the Internet Fax mode
settings (original orientation and other various settings) are given priority. When performing this type of broadcast
transmission, note the information below.
Original placement orientation
Send size
Exposure
Resolution
File compression mode
Colour scanning
Special modes
Scan file size
Resending to unsuccessful broadcast transmission destinations
The results of a completed broadcast transmission can be checked in the job status screen. If transmission to any of the
addresses failed, resend the image to those addresses.
1
(1)
Print Job Scan to
Address Set Time
Broadcast0001 10:00 04/01 020/003 Connecting
10:05 04/01 000/001 Waiting
AAA AAA
10:22 04/01 000/004 Waiting
BBB BBB
10:30 04/01 000/010 Waiting
CCC CCC
2
10:33 04/01 000/010 Waiting
DDD DDD
If the broadcast transmission included destinations of different modes, the same broadcast transmission key will
appear in each of those modes.
The orientation of Internet fax mode is given priority. When "Rotation Sending Setting"
is enabled in the system settings (administrator), the image is rotated 90 degrees. For
this reason, in some cases the image may not be displayed in the correct orientation.
When the file format is set to [TIFF-S] in Internet fax mode, transmission is only
possible in A4R (8-1/2" x 11"R) size.
The Internet fax settings are given priority.
When the file format is set to [TIFF-S] in Internet fax mode and a high resolution
setting is selected in scan mode, the resolution will be changed to [200X200dpi].
The compression mode will be changed to the compression mode set in
"Compression Mode at Broadcasting" in the system settings (administrator).
Scanning will take place in Mono2 regardless of the colour mode setting.
This cannot be selected in scan mode, however, if selected in Internet fax mode, it will
2in1
also be applied to scan destinations.
If a broadcast transmission is performed that includes destinations for which an
attachment size limit has been set using "Maximum Size of E-mail Attachments
(E-mail)" or "Maximum Size of Data Attachments (FTP/Desktop/Network Folder)" in
the system settings (administrator), the limit will also apply to destinations for which a
limit is not set. (The limitation setting of Scan to E-mail or Internet fax is given priority.)
JOB STATUS
(1) (2)
Fax Job Internet Fax
Pages Status
Job Queue
1 Complete
1
Detail
Priority
Stop/Delete
Press the [JOB STATUS] key.
Display the jobs completed screen.
(1) Touch the tab of the mode that you wish to
display.
(2) Touch the [Complete] key.
5-50
SCANNER/INTERNET FAX
Contents