Peripheral Devices - Sharp MX-M283 Operation Manual

PERIPHERAL DEVICES

This section describes the peripheral devices that can be used with the machine and explains how to use the finisher and
saddle stitch finisher, as well as Sharp OSA (application communication module and external account module).
PERIPHERAL DEVICES
Peripheral devices can be installed on the machine to increase its range of functionality.
The peripheral devices are generally optional, however, some models include certain peripheral devices as standard
equipment.
Product name
Stand/1x500 sheet paper drawer
Stand/2x500 sheet paper drawer
Large capacity tray
Exit tray unit
(Right tray)
Finisher
Punch module
Finisher (large stacker)
Punch module
Saddle stitch finisher
Paper pass unit
Punch module
Barcode font kit
PS3 expansion kit
XPS expansion kit
Product number
MX-DEX8
Additional tray. A maximum 500 sheets of paper can be loaded
in each tray.
MX-DEX9
Additional tray. A maximum of 3500 sheets of paper can be
loaded in the tray.
MX-LCX1
To install the tray, a stand/1 x 500 sheet paper drawer or stand/2
x 500 sheet paper drawer is required.
MX-TRX2 This can be added to the right side of the machine.
Output device that enables the use of the staple function and
MX-FNX9
offset function.
MX-PNX1B Punches holes in copies and other output. Requires a finisher.
Output device that enables the use of the staple function and
offset function.
MX-FN11
To install the finisher (large stacker), a stand/1 x 500 sheet paper
drawer or stand/2 x 500 sheet paper drawer is required.
Punches holes in copies and other output. Requires a finisher
MX-PNX6B
(large stacker).
Output device that enables use of the staple function, offset
function and pamphlet copy function.
MX-FN10
To install the saddle stitch finisher, a stand/1 x 500 sheet paper
drawer or stand/2 x 500 sheet paper drawer is required.
Required when a finisher (large stacker) / saddle stitch finisher is
MX-RBX3
installed.
Punches holes in copies and other output. Requires a saddle
MX-PNX5B
stitch finisher.
AR-PF1 Adds barcode fonts to the machine.
Enables the machine to be used as a Postscript compatible
MX-PKX1
printer.
The machine can be used as an XPS compatible printer. For
details, consult your dealer.
MX-PUX1
To install this kit, a 1 GB expansion memory board (MX-SMX3)
is required.
1-42
BEFORE USING THE MACHINE
(As of February, 2009)
Description
Contents