Sharp MX-M314N Operation Manual page 117

(1)
2-Sided Copy
3
• When the document cover is installed, the [2-Sided to 2-Sided] key and the [2-Sided to 1-Sided] key is not
displayed.
• The [2-Sided to 2-Sided] key and [2-Sided to 1-Sided] key cannot be used when copying from the document glass.
Exposure
Auto
4
Copy Ratio Original
100%
Auto
Depending on the size of the placed original, there may be cases where the same size of paper as the original is not
selected automatically. In this event, change the paper size manually.
5
• Up to 999 copies (sets) can be set.
• A single copy can be made even if "0" appears for the number of copies.
If an incorrect number of copies is set...
Press the [CLEAR] key (
Press the [START] key.
6
Scanning begins.
Remove the original and place the next original, and then press the [START] key.
7
Repeat this step until all originals have been scanned.
(2)
OK
Binding
Change
Special Modes
2-Sided Copy
Plain
A4
Output
A4
1.
A4R
2.
File
B4
3.
A3
4.
Quick File
Paper Select
Auto
A4
A4 Preview
Plain
Special Modes
2-Sided Copy
Plain
A4
) and then enter the correct number.
Select the 2-sided copy mode.
(1) Touch the [1-Sided to 2-Sided] key.
(2) Touch the [OK] key.
Check the paper to be used.
Make sure that the desired paper (tray) is selected.
• To change the paper (tray), touch the [Paper Select] key.
PAPER TRAYS
Set the number of copies (number of
7
sets) with the numeric keys.
2-19
(page 2-11)
Contents
COPIER