Sharp MX-M314N Operation Manual page 131

Staple sort function
The staple sort function sorts output into sets, staples each set, and delivers the sets to the tray.
The relations between the stapling positions, paper orientation, permitted paper sizes for stapling, and number of sheets
that can be stapled are shown below.
For original placement orientations, see
Stapling positions
1 staple at top left
corner
* You can insert 2 sheets of maximum 200g/m
from the maximum number of sheets that can be stapled and use those many sheets.
• The number of sheets that can be stapled at once includes any covers and/or inserts that are inserted.
• When Mixed Size Original in the special modes is used with the "Same Width" setting, the maximum number of sheets that
can be stapled is 30 for a finisher regardless of the paper size.
"Original placement orientation (for the staple
Staple sort
Vertically-oriented paper
Applicable paper sizes
A4, B5, 8-1/2" x 11", 16K
Number of sheets that can
be stapled:
Max. 50 sheets*
2
as cover sheets and staple them. In such cases, you can subtract 2
2-33
sort)" (page 2-34).
Horizontally-oriented paper
• Finisher
Applicable paper sizes
A3, B4, A4R, B5R, 11" x 17",
8-1/2" x 14", 8-1/2" x 13-1/2",
8-1/2" x 13-2/5", 8-1/2" x 13",
8-1/2" x 11"R, 8K, 16KR
Number of sheets that can be stapled
A3, B4, 11" x 17", 8-1/2" x 14",
8-1/2" x 13-1/2", 8-1/2" x 13-2/5",
8-1/2" x 13", 8K:
Max. 30 sheets*
A4R, B5R, 8-1/2" x 11"R, 16KR:
Max. 50 sheets*
Contents
COPIER