Auxiliary Cleaning Modes - LG VSR8600 Manual

Turbo Mode
Pressing the 'Turbo' button on the Remote
Controller or main unit will activate 'Turbo' mode,
with a voice message.
While in 'Turbo' mode, pressing the same button
will cancel 'Turbo' mode, with a voice message.
In 'Turbo' mode, Robot Cleaner runs more
intensely for a powerful clean. Turbo mode will
reduce the battery duration.
※ <Turbo Mode (Floor Master Function)>
'Turbo mode' will automatically operate when the
Robot Cleaner cleans carpets.
Repeat Mode
Pressing 'Repeat' button on Remote Controller will activate 'Repeat'
mode, with a voice message.
While in 'Repeat' mode, pressing the same button will cancel 'Repeat'
mode, with a voice message.
In 'Repeat' mode, Robot Cleaner repeats the cleaning in progress
until the battery runs out without returning to the home station.
Learning Mode
The Robot Cleaner is capable of memorising the
cleaning environment through its Learning mode
for an intelligent cleaning operation.
※ 'Learning Mode' is available only when the
machine starts cleaning from the Home
Station.
Tip
• Precautions with Smart Operation
- This Learning mode enables memorizing locations with obstacles to help bypass them.
Robot Cleaner memorizes every aspect of the environment it was subjected to from
when it started cleaning from the Home Station to the moment it finishes its course.
- Robot Cleaner learns new conditions again when the location of Home Station has
been changed.
- If the learning mode is accepted, a voice message will say "Environment has been
studied by learning process."

AUXILIARY CLEANING MODES

21