LG VSR8600 Manual page 38

[IEC 62929 Standard] Setting for Cleaning Performance Test
Dust Removal Test - Box(Hard Floor & Carpet)
1. Put fully charged Robot Cleaner down on start point and turn on.
2. Push 'TURBO' button on the Robot Cleaner or 'Turbo' button on the Remote Controller and Robot
Cleaner will be set Turbo Mode.
3. Push 'Repeat' button on the Remote Controller and Robot Cleaner will be set Repeat Mode.
4. Push 'START/STOP' button on the Robot Cleaner or '
Robot Cleaner will be operated.
Dust Removal Test - Straight Line(Hard Floor & Carpet)
1. Put fully charged Robot Cleaner down on start point and turn on.
2. Push two button like picture for 3 seconds to access Test
Mode(Straight).
3. (1) In case of testing on Hard Floor : Display will be on and flashing.
(2) In case of testing on Carpet : Repeat, Operational Status, Mute
Icon will be on and flashing.
※ Change LED expression by pushing 'Mode' button on the
Remote Controller.
4. Push 'START/STOP' button on the Robot Cleaner or '
the Remote Controller and Robot Cleaner will be operated.
[Hard Floor Test mode]
Autonomous navigation/coverage test
1. Put fully charged Robot Cleaner down on start point and turn on.
2. Push 'Repeat' button on the Remote Controller and Robot Cleaner will be set Repeat Mode.
3. Push 'START/STOP' button on the Robot Cleaner or '
Robot Cleaner will be operated.
※ Use this mode only when organizations test cleaning performance or driving performance according
to IEC62929
' button on the Remote Controller and
' button on
[Carpet Test mode]
' button on the Remote Controller and
37