Table of Contents
Advertisement
AUXILIARY CLEANING MODES
Manual Cleaning
By pressing a direction key on the Remote Controller, you can move the Robot Cleaner manually.
Robot Cleaner will clean the area, by pressing the forward/backward/left/right buttons accordingly on
the keypad of the remote control.
While in 'Manual' mode, the robot cleaner will run into obstacles placed behind it if the backward key
on the remote is pressed or held down.
Spot Cleaning
Is best used to clean certain parts of the house.
Press 'Mode' button on the Remote Controller to select 'Spot' mode, which will then indicate on the
Status Display, then press the 'Start' button, then Robot Cleaner will start Spot cleaning an area of
1.5 m in diameter around it.
※ While recharging, 'Spot' cannot be selected.
It stops at the started position after
completing the cleaning(takes 4~5 min.).
22
Advertisement
Table of Contents
