Table of Contents
Advertisement
In the lower window you will see in the first line the name of the selected programme. Below it,
available characters are shown. Use the green button to switch between capital and lower-
case letters.
In the name, use the red and blue buttons to select the characters you wish to change. The
current position that can be changed is highlighted in colour.
Now use the
and ◄► buttons to select the character you would like to insert. Then press
OK, to insert the character in the name.
To accept the new name press EXIT. The newly modified name will now be shown in the list of
recordings.
Operating the external mass storage device
If an external mass storage device is connected to the USB-Socket on the rear side of the
receiver, you can store recordings on it.
The recording capacity depends on the size of the mass storage device and the data volume
of the broadcast material.
Recording
Various modes of recording area available for you to record programmes onto the mass
storage device.
1. Immediate recording
Switch on the channel you want to record.
Press the red record button to record the current programme. While the recording is running,
the programme continues to be shown on the screen.
To stop an immediate recording, press the stop button.
2. Timer recording
You can record programmes onto a connected mass storage device in your absence using the
Timer recording function. Programme a Time recording as described in the chapter " Timer".
Select the menu item Record on the mass storage device.
Select a channel during a record
During a record, all channels in the channel list which are in white colour can be seen.
Channels which are black, cannot be seen during a record.
The channel which is recorded, is marked with a red point in the channel list.
Timeshift function
The Timeshift function enables you to record and playback at the same time. This gives you
various options:
1.
Time-delayed television. You can watch the beginning of the recording and jump over
recorded passages (e.g. commercial breaks).
Press the red record or PAUSE button to start a timeshift recording.
To watch the partially recorded programme, press the Playback button. The programme
is then played from the moment of recording, while the current programme continues to
be recorded in the background.
If you want to stop the playback and return to normal TV operation, press the Stop
button. To stop a timeshift recording press the Stop button.
- 26 -
-
Advertisement
Table of Contents
