Settings - Receiver Setup - Triax C-HD207CG Manual

Press the OK button.
The following menu is displayed:
Choose the menu item Receiver Setup by pressing
confirm by OK.
Settings – Receiver setup
The following menu is displayed:
Receiver setup
Time difference
Menu language
Initial volume
HDMI Audio Bitstream
Auto Standby
Low-Power-Standby
1) Time difference
When operating the receiver for the first time you should set the derivation between your
local time and the received GMT time (Greenwich Mean Time) by pressing ◄ or ►.
For Central Europe the following settings are recommended:
Winter time:
Summer time:
Note: This setting has to be updated at each summertime shift.
2) Menu language
Choose your language by pressing ◄ or ►.
3) Initial volume
The initial volume after a power reset of the receiver is adjusted here by pressing ◄ or ►.
4) HDMI Audio Bitstream
HDMI Audio Bitstream can be switched ON or OFF by pressing ◄ or ►.
5) Auto Standby
Auto-Standby function can be switched ON or OFF by pressing ◄ or ►.
6) Low-Power Standby
Low-Power Standby function can be switched ON or OFF by pressing ◄ or ►.
+2.00 Std.
English
90%
Off
On
On
+1.00 hour
+2.00 hours
13
Settings
Receiver setup
Picture
and
Sound
Subtitle
OSD configuration
Parental lock
Settings