Settings - Picture - Triax C-HD207CG Manual

Settings – Picture
For entering the Picture menu, select menu item Picture in the Settings menu and press OK.
The following menu appears:
1) Analog Video
The analog video output at the SCART socket
can be adjusted by pressing ◄ or ►. You can
select among following options: FBAS, RGB, or
YUV.
2) Digital Video
The digital video output at the HDMI socket can
be adjusted by pressing ◄ or ►. You can
select among following options: YcbCr or RGB.
3) Display format
Use ◄ or ► for selecting the screen format of your TV set (4:3, 16:9).
4) Display adjustment
Use ◄ or ► for adjusting the video signal: pan & scan, letterbox or pillar box.
5) Videosystem
Use ◄ or ► for adjusting the video system: AUTO, PAL, NTSC.
6) Picture scaling
Here you can choose the picture resolution.
720 x 576
1280 x 720
1920 x 1080
a.) Television connected to Scart-Socket:
If your TV is only connected to the scart-socket of the receiver, you get the best picture quality,
if you choose in the menu item „Picture scaling" 720x576 for all output signals.
b.) Television connected to HDMI-Socket
If your TV is only connected to the HDMI-socket of the receiver, you get the best picture
quality, if you choose in the menu item „Picture scaling" Input signal = Output signal.
If you prefer fast channel switching, all output signals must be the same.
Press EXIT to leave this menu. For storing your modifications select Yes (◄ or ►), for
keeping the previous settings select No.
Confirm your choice by pressing the OK button.
Picture
Analog Video
Digital Video
Display format
Display adjustment
Videosystem
Picture scaling:
>Input 720x576
>Input 1280x720
>Input 1920x1080
- 14 -
Settings
RGB
YCbCr
16:9
Letterbox
Auto
Output 1280x720
Output 1280x720
Output 1280x720