Web Page of This Machine
You can make network settings or menu settings from the Web page of this machine.
•
Open the Web Page of This Machine
•
Log In as the Administrator
•
Changing the Administrator Password (Web Page)
•
Checking or Changing the Settings of This Machine
•
Encrypting Communication with SSL/TLS
•
Using IPP
•
Encrypting Communication with IPSec
•
Limiting by Using an IP Address (IP Filtering)
•
Limiting by Using a MAC Address (MAC Address Filtering)
•
E-mail Alert
•
Using SNMPv3
•
Using IEEE802.1X (Wired LAN)
•
Setting IEEE802.1X (Wireless LAN)
•
Setting the LDAP Server
•
E-mail Setup (Web Page)
•
Setting Power Save Mode (Web Page)
•
Setting Sleep Mode (Web Page)
•
Setting Auto Power Off Mode (Web Page)
•
JOB MACRO (Web Browser)
•
About Items That Can be Set or Checked
Open the Web Page of This Machine
• Check whether your browser is set as follows.
• Set the security setting for the Web page to the middle level, or enable Cookie.
• To enter the [Admin Setup] menu, the administrator password is required. The factory default password is
"999999".
• To change settings of the machine on the Web page, you must log in as the administrator of the machine.
The description uses the following environment as an example.
• Device name: C542
• IP address of the machine: 192.168.0.2
1
Start a Web browser.
2
Enter "http://(The IP address of this machine)" in the address bar, and then
press the <Enter> key.
About the IP Address of this machine, refer to
If the IP address includes a value in one or two digits, do not enter "0" before the value. Communications may not
be performed correctly.
• An example of a correct entry: http://192.168.0.2/
• An example of an incorrect entry: http://192.168.000.002/
- 191 -
7. Utility Software
"Printing a Report to
Check".