Network Menu - Oki ES5442 Advanced Manual

Network Menu

• Network Setup
• Mail Server Setup
• LDAP Server Setting
• Secure Protocol Server Setting
Network Setup
• Network Setting
Item Factory default setting
Enabling Default Gateway Wired
Wired Enable
TCP/IP Enable
NetBIOS over TCP Enable
IP Address Set Auto
IPv4 Address 192.168.100.100
Subnet Mask 255.255.255.0
Gateway Address 0.0.0.0
DHCPv6 Disable
DNS Server (Primary) 0.0.0.0
DNS Server (Secondary) 0.0.0.0
WINS Server (Primary) 0.0.0.0
Description
Sets which default gateway to be enabled between
wired LAN or wireless LAN.
This item is displayed, if wireless LAN module
fitted.
Sets whether to enable wired LAN.
Sets whether to enable TCP/IP.
Sets whether to enable NetBIOS over TCP/IP.
This item is displayed when TCP/IP protocol is
enabled.
Sets the method of assigning an IP address.
Sets an IP address.
This item is displayed when TCP/IP protocol is
enabled.
Sets a subnet mask.
This item is displayed when TCP/IP protocol is
enabled.
Sets a gateway address.
This item is displayed when TCP/IP protocol is
enabled.
Selects enable / disable of DHCP when IPv6 is
used.
Sets the IP address for a Primary DNS server.
This item is displayed when TCP/IP protocol is
enabled.
Sets the IP address for a Secondary DNS server.
This item is displayed when TCP/IP protocol is
enabled.
Sets the name or the IP address for the WINS
server.
This item is displayed when TCP/IP protocol is
enabled.
Item Factory default setting
WINS Server (Secondary) 0.0.0.0
Proxy Disable
Proxy Server (NULL)
Proxy Server Port No. 8080
Proxy User ID (NULL)
Proxy Password (NULL)
Web Enable
Telnet Disable
FTP Disable
IPSec Disable
SNMP Enable
Network Scale Normal
Gigabit Network Disable
HUB Link Setting Auto
• Wireless (Infrastructure) Setting (If wireless LAN module fitted)
Item Factory default setting
Wireless(Infrastructure) Disable
- 129 -
5. Operating Management/ Specifications
Description
Sets the name or the IP address for the WINS
server.
This item is displayed when TCP/IP protocol is
enabled.
Sets whether to use proxy.
Sets the name or IP address of the proxy server.
You can enter up to 15 characters.
Sets the port number of the proxy server.
Sets the user ID to connect to the proxy server.
Sets the password to connect to the proxy server.
Sets whether to enable access from a Web
browser.
This item is displayed when TCP/IP protocol is
enabled.
Sets whether to enable access from the Telnet.
This item is displayed when TCP/IP protocol is
enabled.
Sets whether to enable access with FTP.
This item is displayed when TCP/IP protocol is
enabled.
This item is displayed only if IPSec is set to valid.
This item can be changed to disable only.
[Enable] can only be set on the web page.
Sets whether to enable access from SNMP.
This item is displayed when NetWare or TCP/IP
protocol is enabled.
[Normal]: The machine operates effectively even if
connected to a HUB with the spanning tree
function. However, the machine takes longer to
start up if it is connected to a small LAN that
consists of two or three computers.
[Small]: This setting covers a small LAN that
consists of two or three computers to a large LAN,
but the machine may not operate efficiently if it is
connected to a HUB with the spanning tree
function.
Sets whether to enable access with Gigabit
Ethernet.
Sets the hub linking method. Normally, select [Auto
Negotiate].
Description
Sets whether to enable Wireless(Infrastructure).