Table of Contents
Advertisement
LOG SET
INSTALLATION
Read the instructions below carefully and re-
fer to the diagrams. If logs are broken do not
use the unit until they are replaced. Broken
logs can interfere with the pilot operation.
The gas log kit contains the following:
A Rear Log
B Middle Left Log
C Front Right Log
D Front Left Log
E Middle Left 'Y' Log
F
Center Upright Log
G Middle Right Log
Lava Rock,
Note: Install Optional Brick Panels prior
to installing logs.
B
E
D
1. Carefully remove the logs from the box and
unwrap them. The logs are fragile, handle
with care - do not force into position.
2. Place the Lava rock on either side of the
burner - DO NOT place lava rock anywhere
on the actual burner.
Lava
FG39-2 Freestanding Gas Stove
A
G
F
C
Log ID
Lava
3. Install Log A onto the 2 pins on the rear log
bracket -- in locations shown below.
A
Pins on Rear Log Support
4. Install Log B onto the 2 pins on the burner in
locations shown below.
B
Log B Pins
B
Log B in position
5. Install Log C onto the 2 pins on the burner in
locations shown below.
Log C Pins
installation
C
25
Advertisement
Table of Contents
