General Pipe Cleaners P-T3 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. General Pipe Cleaners Manuals
  4. Pipe cleaners
  5. P-T3
  6. Operating instructions manual

General Pipe Cleaners P-T3 Operating Instructions Manual

Hide thumbs Also See for P-T3:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
Your Sewerooter T-3 is designed to
give you years of trouble-free, profitable
service. However, no machine is better
than its operator.
Read, understand and follow all safety
warnings and instructions provided with
the product. Failure to follow the warnings
and instructions may result in electric
shock and/or serious injury. Save all warn-
ings and instructions for future reference.
SAVE THESE INSTRUCTIONS!
Sewerooter T-3
Operating Instructions
For 1-1/4" through 3" and Most 4" lines
(30mm—100mm)
™

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P-T3 and is the answer not in the manual?

Questions and answers

Related Manuals for General Pipe Cleaners P-T3

Summary of Contents for General Pipe Cleaners P-T3

  • Page 1 ™ Sewerooter T-3 Operating Instructions For 1-1/4” through 3” and Most 4” lines (30mm—100mm) Your Sewerooter T-3 is designed to give you years of trouble-free, profitable service. However, no machine is better than its operator. Read, understand and follow all safety warnings and instructions provided with the product.

  • Page 2: Safety Symbols

    Sewerooter T-3™ Electric shock resulting in death can occur if you plug this machine into an improperly wired outlet. If the ground wire is electrified, you can be electrocuted by just touch- ing the machine, even when the WARNING! Read and understand all power switch is off.
  • Page 3 Sewerooter T-3™ GENERAL SAFETY RULES Personal Safety Stay alert, watch what you are doing and use common sense WARNING when operating a power tool. Do not use tool while tired or Read and understand all instructions. Failure to follow all in- under the influence of drugs, alcohol, or medication.

  • Page 4: Specific Safety Rules

    Sewerooter T-3™ SPECIFIC SAFETY RULES Ground Fault Circuit Interrupter (GFCI) Your machine is equipped with a ground fault circuit interrupter, which protects you against shock if a short circuit should occur. Check that This is the safety alert symbol. It is used to alert receptacle is properly grounded.

  • Page 5: Operation

    Sewerooter T-3™ Cable Application Chart (Table 1) Select the proper cutting tool (See Cutter Application Chart— Table 2). A good tool to start with is the Arrow Head or 1-1/2” U- Cable Size Pipe Size Typical Applications Cutter. After the line is opened, follow with larger blades, which scrape the inside edges of the pipe, assuring a real cleaning job.

  • Page 6: Special Operations

    Sewerooter T-3™ Move the motor switch to the forward position again, and con- If you're having trouble getting around tinue at Step 3 of the Operating Instructions. tight bends, try putting the machine in reverse while applying steady pres- DO NOT RUN MOTOR IN REVERSE FOR MORE THAN A sure.

  • Page 7: Maintenance

    Sewerooter T-3™ HOW TO INSTALL CABLES IN DRUM Remove the feed pressure knob, cover screws, top cover, spring, ball bearing and ball bearing holder. Note the positioning of these parts to ease re-assembly. Remove the swing pin from the car- DISCONNECT MACHINE FROM POWER SOURCE rier.
  • Page 8 Sewerooter T-3™ TANGLED CABLE If a cable loops over itself in the drum, it will not feed properly. Remove and reload the cable to restore function. If the cable kinks, it is evidence of abuse and results from the use of too much pressure or use of the wrong size cable for the line. Do not force the cable — let the cutter do the work. TROUBLE SHOOTING GUIDE (Table 3) Problem Probable Cause...

This manual is also suitable for:

Sewerooter t-3

Table of Contents